Lynn & Inner Dowsing Offshore Wind Farms

In 2007, we installed 54 foundations on the Lynn & Inner Dowsing sites located on the east coast of England.

Installation method

The foundation concept is a steel monopile solution with a grouted transition piece installed on top of it, allowing for a standard flange connection to the turbine tower.

Depending on the soil conditions, the installation method of the monopiles was either driving or a combination of drilling and driving.

Pilegripper developed by MT Højgaard

The verticality was adjusted using a pilegripper developed by us. Subsequently, the transition piece was positioned, with all accessories such as boat landing, platforms and anodes pre-assembled, and adjusted by hydraulic jacks.

J-tubes

The connection between the monopile and transition piece was finally grouted, using the patented MT Højgaard grout packer. Finally, internally positioned J-tubes were installed, followed by installation of the external J-tubes. The external J-tubes are spanning the scour which is expected to develop around the pile. The foundation installation was completed in the winter of 2007.

MT Højgaard participates at EWEA OFFSHORE 2011

The world's largest offshore wind energy event is held in Amsterdam from 29 November to 1 December.

Read more

Energy

Middelgrunden Offshore Wind Farm

20 foundations for wind turbines on the bank of Oresund close to Copenhagen Harbour supplied and installed in 2000.

Read more about the project

Energy

Rhyl Flats Offshore Wind Farm

25 foundations designed and installed, based on the traditional monopile concept.

Read more about the project